Align Series Reverb
User’s Guide

Introduction

Der ALIGN Reverb wurde von Grund auf neu entwickelt, um die natürliche Körperdynamik und Wärme akustischer Instrumente zu ergänzen, die wir so sehr lieben.  Die Schaltung kombiniert nahtlos die nassen und trockenen Signale mit dem Effekt, so dass sich niemals das ursprüngliche Signal überlagert.  Wir haben den Reverb mit analogem EQ so gestaltet, dass er die natürliche Stimme akustischer Instrumente widerspiegelt. Darüber hinaus bietet die Klangregelung eine Vielseitigkeit, indem sie von warm und gedämpft bis hin zu offen und präsent wechselt. Das Ergebnis ist ein organischer REVERB, der die audiophile Reinheit des Originalsignals beibehält. HIER FINDEN SIE DEN KOMPETENTEN LR BAGGS FACHHÄNDLER IN DEUTSCHLAND UND ÖSTERREICH

Getting Started

Power the Reverb with a 9V power supply or a 9V battery.

1. Plug your instrument into the input to activate the Reverb (upper right hand side) and a cable into the ¼” output (upper left hand side).

2. Start with the volume control at noon. This should match the engaged signal with the bypassed signal.

3. Plug the ¼” cable into your amp, PA, or next pedal in the signal chain and experiment with the Reverb.

A. Tone
This is a simple control to help you alter the tone of the reverb itself. It will not affect the tone of your instrument, only the tone of the reverb. Turn the control clockwise for a present, reflective sound or counter-clockwise for dark, subdued tones.

B. Instrument Input
The ¼” input is an unbalanced (mono), all-discrete input. Plugging into the input will activate the Reverb, therefore, unplugging will turn the system off.

C. Decay
The decay control adjusts the length of the reverb tail. Start with the control counterclockwise and you’ll hear a subtle reflection of your acoustic instrument. Turn it clockwise and you’ll find yourself playing in an expansive, open space. Adjust to taste.

D. Engage
Press the footswitch to engage the effects. When the light is on, all of the controls on the Reverb are engaged. When the light is off, the whole pedal is true bypassed.

E. Reverb
The reverb control blends an affected reverb signal with an unaffected instrument signal. When turned fully counterclockwise, no reverb will affect the signal. Turn clockwise to add reverb.

F. ¼” Out
The ¼” output is an unbalanced, line level output. You can plug into any amp or device that has a ¼” input. We recommend running into any other LR Baggs Align pedals, DI’s, or the Synapse Personal PA System.

G. Volume
The master volume will help you find a balance between your engaged and bypassed signal. It is only active when the engage light is on. Keep in mind that the level of the reverb control can affect this balance, so you may need to adjust the volume as you adjust the effect.

A. DC Input
The DC power input is designed for a standard 2mm plug commonly used with effects pedals and “floor-box” products. Most power supplies or multi-power devices designed for musical products may be used. 9VDC recommended with a 12VDC maximum. Plugging in a power supply will activate the Reverb.

Limited Warranty

L.R. Baggs warrants to the using purchaser that this product shall be free of defects in workmanship and materials under normal and proper use for a period of one year. If you experience problems with this product, please contact your dealer.

Register your Align Series Reverb

Visit the Align Series Reverb Product Page